Mounting Tape

This is a double-sided self-adhesive transfer tape for mounting purposes. The tape can be applied much faster than a conductive glue and easy to position very accurately. No time is required for curing (for the pressure-sensitive version). For lower resistance and/or to fill in gaps on a rough surface, we recommend Shieldokit electrically conductive two-component adhesive (see Conductive glue)

3205 Conductive adhesive is especially useful where there is requirement to bond conductive materials together at the same time maintaining electrical conductivity of one material to the other through the bond.

Apply the tape to one of the prepped surfaces to be bonded. Use firm pressure to ensure intimate contact to the surface. Allow up to 15 minutes for the bond to stick properly before removing the paper backing. Apply the second bonding surface to the adhesive layer again using firm pressure.

Note: Bonding surfaces should be clean & dry.

3205 will withstand long term exposure (up to 20.000 hours) at temperatures up to 130 °C. The acrylic adhesive is UV resistant and is unaffected by exposure to sunlight or humidity. 

Note: When laminated to conductive substrates such as metal foils and conductive fabrics/non-woven the adhesive strength of the laminated product may vary slightly from that stated above due to different substrate rigidities.