EMI Shielding Foils

JHSC Home / Products / Holland Shielding Home / EMI Shielding Foils

EMI Shielding Foils

Please select a product below 

Conductive foils, fabrics and sheet materials for EMI shielding. These materials are used to shield plastic housings and enclosures against unwanted electromagnetic signals. Please select one of the EMI-shielding foils below to continue

Many EMI problems can be solved easily by the use of conductive foils, fabrics or sheets. Some of the most commonly used materials are Mu-copper foil, reinforced Amucor foil and highly conductive textile.

All of these materials can be produced with or without (conductive) self-adhesive and an optional insulation layer.

In addition, all materials can be cut according to CAD drawing in any desired shape and/or size.

Shielding performance of different foils
 
FieldFrequencyMu-copper foilAmucor foilConductive textile foilMu-ferro foil
  0.12 mm thick0.04 mm thick0.10 mm thick
E1 MHz125 dB121 dB115 dB

Developed for low-frequency (LF) magnetic field shielding

E10 MHz101 dB110 dB108 dB
E100 MHz120 dB103 dB102 dB
E400 MHz115 dB98 dB92 dB
P1 GHz110 dB92 dB90 dB
P10 GHz120 dB85 dB80 dB
These values are measured under laboratory conditions.
In other situations results may differ; please read our Guarantee.

Conductive foils, fabrics and sheet materials for EMI shielding, used to shield plastic housings and enclosures against unwanted electromagnetic signals

All EMI-shielding foils and fabrics can be cut according to CAD drawing in any desired shape and/or size

EMI shielding foils (please select one)
 

3281 series – Smooth Mu-copper foil with a (conductive) acrylic pressure-sensitive adhesive and liner. The …

Mu-copper foil shows superb shielding performance, also at low frequencies, can be soldered, and can be folded into the right shape easily.

Conductive textile with self-adhesive can be applied easily to plastic housings to cover non-standard forms and shapes.

Mu-ferro foil and tape has been developed for shielding low-frequency (LF) magnetic fields.

Especialy developed for Aluminium housings and frames, to prevent galvanic corrosion.