XYZ Enclosures for EMI Shielding

JHSC Home / Products / Holland Shielding Home / XYZ Enclosures for EMI Shielding

XYZ Enclosures for EMI Shielding

XYZ Enclosures for EMI shielding 1920

Custom size EMI shielding enclosures, for the standard price and no tooling cost.

The XYZ EMI shielding housings 1920 series not just has a fresh new modern look but also shields very well. They can be supplied in any size within few days. The shielded housing is made up of only two parts, however, when open, it opens on three sides of the housing.

Assembly is very simple and can be produced in 3mm thick aluminum or 2mm thick stainless steel (other thickness and materials on request). For good electrical contact and easy opening of the housing, it is made use by sophisticated snap on fingers, bolts and/or locks which result in controlled access to the inside. The round corners give the housing a friendly look and feel, but the housing is also rigid and molest -proof.

Shielding performance (dB)

■ XYZ shielded enclosures (180x85x67)

Please note: These values are measured under laboratory conditions. Results may vary in other situations; Please read our Guarantee.

Options

The box can be personalized with your logo.
Cutouts on all 6 sides for displays, ventilation panels, connectors, power supply, cable entries, switches, buttons and so on.
At the interior mounting holes, thread- spuds.
Can be supplied with EMI power and or signal line filters (see Data- and power line-filters)

Benefits

Quick open/close system
Easy accesses components inside
Any not standard size in a few days
Plain / stylish design
Customization outside with cutouts for data- and power lines
Good shielding properties

Applications

Shielding of electronic components
Rigid, so very well for heavy-duty military applications
Hand-held test and measurement devices
Radio control equipment
Wall-mounted monitoring systems
Security devices
Building control equipment

Data- and power line-filters

This housing can be personalized with a power line, USB, VGA, Flat cable, etc.

Standard sizes

Part number	X (mm)	Y (mm)	Z (mm)	Radius
1920-79x84x44	79	84	44	15
1920-79x84x67	79	84	67	15
1920-100x85x44	100	85	44	15
1920-100x100x90	100	100	90	15/30
1920-127x125x60	127	125	60	15
1920-127x125x90	127	125	90	15/30
1920-130x85x44	130	85	44	15
1920-130x85x97	130	85	67	15
1920-150x100x75	150	100	75	15
1920-150x125x125	150	125	125	15/30
1920-166x166x60	166	166	60	15
1920-166x166x100	166	166	100	15/30
1920-180x85x44	180	85	44	15
1920-180x85x67	180	85	67	15
1920-200x150x75	200	150	75	15
1920-200x200x150	200	200	150	15/30
1920-226x126x60	226	126	60	15
1920-226x126x90	226	126	90	15/30
1920-250x150x90	250	150	90	15/30
1920-250x200x120	250	200	120	15/30
1920-250x250x250	250	250	250	15
1920-268x168x60	268	168	60	15/30
1920-268x168x100	268	168	100	15/30
1920-300x200x100	300	200	100	15/30
1920-300x250x200	300	250	200	15/30
1920-300x300x300	300	300	300	15/30
1920-350x250x150	350	250	150	15/30
1920-350x300x250	350	300	250	15/30
1920-350x350x350	350	350	350	15/30
1920-400x300x200	400	300	200	15/30
1920-400x350x300	400	350	300	15/30
1920-400x400x400	400	400	400	15/30

Closure/options

A) Snap connection. For easy open/closing

C) Bolted connection, when you don’t need to open the housing often

E) Housing with Knitted mesh gasket

G) Shielded window

B) Watertight housing

D) Internal EMI shield without environmental 10 kHz-1GHz

F) Sandwich. Conductive rubber gasket in between housing.

H) Spuds for PCB

Custom sizes and shapes can be produced on request and according to your drawing. There are several options available for the closure options. For example, if you want A snap connection with G Shielded window please mention A, G. Send your drawing to request a quote for a custom shape to info@japanhomeland-security.jp .

Get a Quotation

Fill in the form below

Name

Company

Phone Number

Series

Length X (mm)

Width Y (mm)

Height Z (mm)

Optionally add a drawing of the product here.

Amount

Unit

Email Us

Call Us

XYZ Enclosures for EMI Shielding