Skip to content
Mu-copper cable shielding, flexible shielding tube for high shielding performance. A wide range of cable diameters can be shielded with a single tube.
Full metal flexible cable shielding is a ready-to-use Mu-copper wire or tinned Mu-copper wire braided tube through which a cable or bundle of cables can be pulled. When the braided full metal flexible cable shielding is compressed lengthwise, the diameter expands to simplify the assembly. Therefore a wide range of cable diameters can be shielded with a single flexible shielding tube.
Please note that the Full metal flexible cable shielding has to be expanded for larger diameters and that a larger nominal length will then be required – up to twice the length of the cable.
Typical EMI/RFI problem areas behind connectors and backshells can easily be shielded with the 4800 series Full metal flexible cable shielding (a.k.a. tubular braids). Multiple sizes are available to shield problem areas at the ends of cables or harnesses where additional EMI/RFI shielding is necessary to meet demanding specifications.
Advantages of Full metal flexible cable shielding
A stainless steel braiding version is optional on request
|Diameter (mm)||Diameter (inch)||Part number||mm2|
|0 – 3||0 – 0.12||4803||0.5|
|3 – 6||0.12 – 0.24||4806||1.32|
|5 – 15||0.2 – 0.59||4815||7.9|
|12 – 24||0.47 – 0.95||4824||12.4|
|20 – 36||0.79 – 1.42||4836||19.4|
|32 – 48||1.26 – 1.89||4848||–|
|42- 60||1.65 – 2.36||4860||–|
|These values are measured under laboratory conditions.|
In other situations results may differ; please read our Guarantee.
Get a quotation
Fill in the form below