V-Shape Gasket

V-shape gasket

V-shape gasket 8700 header

V-Shape Gasket 8700

V-shape EMI/RFI shielding gaskets for applications between lids, hinges and locks, and between doors and doorframes

V-shape EMI/RFI shielding gaskets are for applications between lids, hinges and locks, and between doors and doorframes.

The V-shape gaskets 8700 series are characterized by a very large compression range and low closure force. They come with a self-adhesive strip for easy mounting. The most common version is with conductive nickel over copper textile (Material code T).

The version with highly conductive Amucor foil (Material code A) is designed specifically to be combined with aluminum and zinc-plated steel. To prevent loss of material and for logistics V-Shape Gasket 8700 is cut to exact lengths. The longest length available is 2.5 meters.

V-shape gaskets are also available with a resilient foam rubber insert for more compression to cushion the impact during door closing.

The V-shape gasket 8700 series is flame retardant and can be supplied in a UL94V-0 compliant version. Excellent shielding can be achieved without any permanent closure force. This construction prevents bending of doors so the enclosure can be less rigid. It is also suitable for hinges and locks.

  • Easy to fit with self-adhesive
  • Allows for large tolerances
  • High EMI/RFI shielding performance
  • Very high deflection
  • Very low closure force
  • Lengths of 5 mm up to 2500 mm
  • Only scissors required for installation
Options (on request):
  • Cut into accurate lengths
  • Different conductive foils and fabrics

V-shape gasket metal door

Metal door

V-shape gasket wooden door

Wooden door

8700 series - V-shape gasket

  8700 - V-shape gasket

Please note : These values are measured under laboratory conditions. Results may vary in other situations. Please read our Guarantee.

V-shape gasket curve

To place the v-shape in a curve, we recommend that the surface is clean, smooth and dust free.

Examples of applications:

The V-shape gasket is intended for applications between lids, hinges and locks as well as between a door and the door frame. There are also other relative applications.

Standard dimensions:

V-shape gasket standard dimensions

V-shape gasket lids top view

V-shape cabinet door hinge

Part number87338744875587668777878887107871212871818872020
Width X (mm)34567810121820
Height Y (mm)0.3-1.50.3-2.00.3-2.520.6-3.00.6-4.00.6-4.00.6-5.00.6-6.01.0-9.01.0-10.0

General documentation

Get a Quotation

Fill in the form below