An electrically conductive silicone grease for improving electrical connections between sliding surfaces and parts
Our Silver-Filled Conductive Grease provides maximum electrical and thermal conductivity, proven lubrication properties, and protection from moisture, oxidation, and other environmental hazards. This product utilizes an advanced silicone lubricant that is compatible with metal, rubber, and plastic.
As with any compound, compatibility with the substrate should be determined on a non-critical area prior to use
Typical applications:
Silver-Filled Conductive Grease may be used for high and low power applications including:
Benefits:
Technical details
| Data | Specification |
|---|---|
| Material | 100% Silver Filled Silicone Grease |
| Color | Silver/Gray |
| Consistency | Smooth Paste |
| Thermal Conductivity (BTU-in/hr-ft2 -°F) (CAL-cm/sec-cm2 -°C) ( W/m°K) | 38.8 1.3 x 10-2 5.6 |
| Volume Resistivity | <0.01 ohm-cm |
| Surface Resistivity | 0.5 – 1.0 |
| Evaporation | < 1% |
| Bleed | < 1% |
| Electrically Conductive | Yes |
| Thermally Conductive | Yes |
| Thermal Conductivity (BTU-in/hr-ft2 -°F) | 38.8 |
| (CAL-cm/sec-cm2 -°C) 1.3 x 10-2 | 1.3 x 10-2 |
| ( W/m°K) | 5.6 |
| Consistency | Paste |
| Operating temperature range | -57 to 252 °C |
| Unworked Penetration (ASTM D-1403) 25 °C | 210 |
| Worked Penetration (ASTM D-1403, 60 Strokes) | 250 |
| Dropping Point (ASTM D-2266) | 255 °C |
| Steel on Steel Wear (ASTM D-2266) | 1.5 mm |
| Corrosion on Copper | None |
| Moisture Resistance | Excellent |
| Chemical Resistance | Excellent |
| Electrical Conductivity | Excellent |
| Thermal Conductivity | Excellent |
| Lubrication Properties | Excellent |
| Protection from Oxidation | Excellent |
| Power Rating | High/Low |
| Standard package | 6.5 grams |
| Shelf life | 10 years |
| ROHS compliant | Yes |
Compatibility:
Silver-Filled Conductive Silicone Grease is generally compatible with rubber, plastic, and metal. As for any compound, prior to use the compatibility with the substrate must be determined in a non-critical area.
Warning:
To avoid shock or possible fire, stop power to any system before applying conductive grease. Ensure positive and negative contacts remain isolated. Improper use can result in shorting, arcing, or shock.
Notice: There are no free samples available for this product.
Get a Quotation
Fill in the form below
© Copyright 2022 Japan Homeland security Corporation. All Rights Reserved.
