Universal EMC gasket to shield lower frequencies
The Knitted Wire Mesh Washers 1250 series was developed to seal the opening between the housing and the bolt holes. They are often used in combination with an EMC gasket or are pre-assembled in gaskets such as the 1200 series knitted wire mesh gaskets.
Applications:
Standard size disks:
| Part number | Outside D Ø (mm) |
| 1250-12.5 | 12.5 |
| 1250-22.0 | 22.0 |
| 1250-30.5 | 30.5 |
| 1250-32.0 | 32.0 |
| 1250-50.0 | 50.0 |
1
Standard size washers
| Part number(mm) | outside D Ø (mm) | Inside d Ø (mm) |
| Standard thickness 2 mm | ||
|---|---|---|
| 1250-6.5-4.0 | 6.5 | 4.0 |
| 1250-7.5-4.0 | 7.5 | 4.0 |
| 1250-9.5-4.8 | 9.5 | 4.8 |
| 1250-10.0-5.5 | 10.0 | 5.5 |
| 1250-10.2-5.8 | 10.2 | 5.8 |
| 1250-12.7-6.0 | 12.7 | 6.0 |
| 1250-12.7-8.0 | 12.7 | 8.0 |
| 1250-12.7-9.0 | 12.7 | 9.0 |
| 1250-15.9-6.4 | 15.9 | 6.4 |
| 1250-15.9-9.5 | 15.9 | 9.5 |
| 1250-15.9-12.0 | 15.9 | 12.0 |
| 1250-19.0-8.0 | 19.0 | 8.0 |
| 1250-19.1-12.7 | 19.1 | 12.7 |
| 1250-19.1-15.0 | 19.1 | 15.0 |
| 1250-22.0-15.9 | 22.0 | 15.9 |
| 1250-22.0-17.5 | 22.0 | 17.5 |
| Please note that many other dimensions are available on request. Bold items are 98% on stock. | ||
| Part number(mm) | outside D Ø (mm) | Inside d Ø (mm) |
| Standard thickness 2 mm | ||
|---|---|---|
| 1250-24.1-19.7 | 24.1 | 19.7 |
| 1250-25.0-20.5 | 25.0 | 20.5 |
| 1250-25.4-15.9 | 25.4 | 15.9 |
| 1250-30.0-10.0 | 30.0 | 10.0 |
| 1250-30.0-25.5 | 30.0 | 25.5 |
| 1250-32.0-15.9 | 32.0 | 15.9 |
| 1250-33.0-28.5 | 33.0 | 28.5 |
| 1250-33.5-19.5 | 33.5 | 19.5 |
| 1250-34.9-28.6 | 34.9 | 28.6 |
| 1250-37.0-32.5 | 37.0 | 32.5 |
| 1250-39.0-34.0 | 39.0 | 34.0 |
| 1250-40.0-32.0 | 40.0 | 32.0 |
| 1250-43.0-38.5 | 43.0 | 38.5 |
| 1250-43.4-37.0 | 43.4 | 37.0 |
| 1250-47.6-30.3 | 47.6 | 30.3 |
Get a Quotation
Fill in the form below
© Copyright 2022 Japan Homeland security Corporation. All Rights Reserved.
