PU Foam Based Flat Absorbers

JHSC Home / Products / Holland Shielding Home / PU Foam Based Flat Absorbers

PU foam based flat absorbers

PU foam based flat absorbers 3650

These absorbers can be used at higher frequencies than traditional shielding and can also be used with other EMI/RFI shields to extend frequency range

These absorbers can be used at higher frequencies than traditional shielding and they can also be used with other EMI/RFI shields to extend frequency range. The microwave absorbers can be installed easily with Pressure Sensitive Adhesive (PSA), often directly onto high-frequency board-level components to absorb unwanted radiated and surface wave EMI/RFI and meet FCC requirements without shielding.

PU foam based flat absorbers have the advantages of light quality and good performance. They can be applied at sites near an antenna, and it can be used to reduce the side-lobe, improve the front-to-back ratio, absorb the clutter, eliminate the interference, and provide the camouflage and concealment of the military facilities.

3650-50 (50 mm height PU foam based flat absorber)

Multiple layer for an optimum performance.

Characteristics

Such absorbers have a flat appearance, with black colour (it can be selected as request), it is clean and soft.
Oxygen index ≥ 29% (GB/T2406-93), which belongs to flame retardant B2 level (GB8624-1997)
Good environmental performance, all raw materials can meet the environmental requirements, no volatile, no smell and non-toxic.
Installation method: Direct adhesive paste and the absorbers with self-adhesive tape can be also offered.
Working temperature: -60 °C~90 °C relative humidity: 55%±15% Frequency range: 1 GHz ~ 18 GHz

Schematic diagram of PU foam based flat absorbers

PU Foam based flat absorbers technical drawing

Product specification and part numbers

Part number *	Unit dimension *B x B x H (mm mm * mm)**	Standard weight (Kg/m2)
3650-5-CF	600 x 600 x 5	0.3
3650-10-CF	600 x 600 x 10	0.5
3650-20-CF	600 x 600 x 20	0.6
3650-50-CF	600 x 600 x 50	1.5
3650-100-CF	600 x 600 x 100	3
3650-40-ML	600 x 600 x 40	1.5

Bold items are on stock

* CF refers to “common flat absorber “

* ML refers to “Multi layer broadband flat absorber”

Please note: Other sizes and thicknesses on request

Reflection loss / Shielding performance

Part number	Reflection loss under vertical incidence (-db @ GHz)
Part number	1	3	6	10	18	40
3650-5-CF				5	10	15
3650-10-CF			10	15	15	18
3650-20-CF		10	15	17	17	20
3650-50-CF	10	18	18	19	19	22
3650-100-CF	15	19	19	20	20	22
3650-40-ML	18	20	20	20	20	23
These values are measured under laboratory conditions. Results may differ in other situation. Please read our Guarantee.

Please note:

For the data above 1 GHz, it is obtained by far-field RCS test method (GJB2038A-2011)
The performance data listed in the above table is the guaranteed data, and the measured data would be equal to or better than the guaranteed data.
The bold part number is a stock item and can be delivered immediately
Certification: CE RoHS

Example drawing of a multilayer (3650-40-ML) PU foam based flat absorber

Technical Datasheet

3650 - PU Foam Based Flat Absorbers TDS

Get a Quotation

Fill in the form below

Name

Company

Phone Number

Part number

Height

Layers

Amount

Unit

Email Us

Call Us

PU Foam Based Flat Absorbers