EMI / RFI Shielded Glass

EMI/RFI Shielded Glass

 EMI/RFI-shielded glass 9600

This new series of EMI/RFI-shielded glass 9600 series is a float glass with a conductive coating on one side to prevent EMI/RFI.

The combination of high light transmission, near-neutral colour and low electrical resistance makes this glass an ideal EMI/RFI shield for electronic displays requiring moderate shielding effectiveness and high-quality optical properties.

This EMI/RFI-shielded glass is suited for outdoor use and provides excellent shielding performance from 10 kHz up to 40 GHz. The coating additionally has good scratch-resistant properties. Typical applications are medical and defense LED/LCD monitors, shielded cameras, sensors and displays.

Our EMI/RFI-shielded glass provides a good balance between shielding on the one hand and optical clarity on the other.

On request EMI/RFI-shielded glass with 20 Ohms/sq is available. This glass has reduced light transmission and increased light reflection.


  • Excellent EMI/RFI shielding
  • High transparency
  • Scratch resistant
  • Suited for outdoor use
  • Any shape or size available
  • Can be produced or cut according to CAD drawing

                                        Technical details

Light transmission:84%
Electrical resistance:10-12 Omhs/sq
Temperatures:-60 / +110 °C
EMI-shielding effectiveness:5 – 60 dB (10kHz – 40GHz)
Available thicknesses:3, 4, and 6 mm
                         Shielded EMI glass 9600
                       Shielded EMI glass 9600
Bezel for glass mounting in all dimension with or without mounting flange with or without IP/EMI gasket

     Options (on request)

  • Tempered to increase impact resistancy
  • Anti-glare
  • Laminated with highly transparent mesh foil for very high shielding performance


                                         EMI-shielded glass in cockpit display
  • Shielded sensors
  • Shielded displays, glass, or windows
  • Shielded cameras
  • RF shielding
  • EMI shielding



Contact edges

EMI/RFI-shielded glass 9600 series is conductive on one side. If you want to establish a connection with the other side of the glass which is not conductive, a contact edge is needed.

The glass is also available finished with an Aluminium frame for easy mounting in Faraday cages and MRI rooms. We can supply EMI-shielded glass with the following edges:

         (C) With copper edges for grounding

(TC) With tinned copper edges for easy soldering and grounding

                             (S) With a silver busbar

(F) With an Aluminum frame for shielded enclosures, Faraday cages and MRI rooms

(N) Without special contact edge; there still is electrical conduction at the coated side of the glass.

Please note: the top layer can be affected by acids, for example from the human skin. To protect the conductive layer, a transparent film can be applied.

Small optical defects are allowed in this product. If you require a product that is absolutely free from optical defects, please state in your enquiry your requirement for the “superior selected quality”. Please note that due to the extreme caution needed in the manufacture of these products, they can be several times more expensive.

Get a Quotation

Fill in the form below.