Felt, metalized with pure nickel
We would like to present our 5730 conductive felt for EMI shielding. A special electrically conductive coating is applied to our felt products to make them conductive. This material is widely used in various industries for EMI shielding applications. Conductive felt is a non-woven polyester fabric with an electrically conductive nickel coating. The thickness is 1.5 mm.
Features:
Options:
Specifications
| Part number | 5730 |
| Tensile strength (length of roll) | >=230 N/5cm |
| Tensile strength (across) | >=340 N/5cm |
| Fabric weight | 150 g/m2 |
| Thickness | 1.5mm |
| Max. elongation | >=55% |
| Flame resistance | UL 94 HB |
| Magnetic field H 0 – 30 MHz | Magnetic field E 1 MHz – 30 MHz | Plane wave 2 GHz – 18 GHz | |||||
| 3 MHz | 15 dB | 1 MHz | 100 dB | 100 MHz | 52 dB | 0.8 GHz | 67 dB |
| 10 MHz | 25 dB | 5 MHz | 75 dB | 150 MHz | 50 dB | 0.9 GHz | 70 dB |
| 15 MHz | 28 dB | 10 MHz | 62 dB | 400 MHz | 62 dB | 1.0 GHz | 70 dB |
| 20 MHz | 32 dB | 20 MHz | 60 dB | 500 MHz | 65 dB | 10.0 GHz | 90 dB |
| 30 MHz | 35 dB | 30 MHz | 56 dB | 700 MHz | 70 dB | 18.0 GHz | 70 dB |
| These values are measured under laboratory conditions. In other situations, results may differ; please read our Guarantee. | |||||||
Get a Quotation
Fill in the form below
© Copyright 2022 Japan Homeland security Corporation. All Rights Reserved.
