JHSC Home / Products / Holland Shielding Home / Contact Surface Tape
A metal tape with a highly conductive self-adhesive on one side and masking tape on the other side.
This contact-surface tape is used to improve the corrosion resistance of construction metals (like untreated steel plates), or to improve galvanic compatibility when 2 metal parts are connected with a gasket. After the parts have been coated, the paint overlaps the metal tape to increase the bonding.
| Part number (with conductive adhesive) | 3204 |
|---|---|
| Part number (with standard adhesive) | 3304 |
| Construction |  |
| Foil material | Soft copper |
| Surface | Shiny |
| Foil thickness | 0.035 mm |
| Total thickness | 0.060 mm |
| Adhesive | Synthetic conductive resin |
| Adhesive performance | 4.5 N/cm |
| Tensile strength | 55 N/cm |
| Temperature resistance | 155 °C |
| El. resistance through adhesive | 0.003 Ohm |
| Standard roll widths (mm)* | 10, 25, 50, 100 |
| Roll lengths* | 16.5 m |
| These values are measured under laboratory conditions. In other situations results may differ; please read our Guarantee. | |
Technical drawing
3204 Contact-surface tape, technical drawing
For more specifications see the “Technical specification” table.
1
Contact-surface tape. The red side is the masking tape
Metal tape with a highly conductive self-adhesive on one side and masking tape on the other side
Get a quotation
Fill in the form below
© Copyright 2022 Japan Homeland security Corporation. All Rights Reserved.