Skip to content
Aerosol conductive graphene hybrid transparent acrylic paint for permanent applications in lighting, windows, clear covers and lids, displays etc.
Our 3821 Conductive transparent paint is a single component permanently conductive hybrid clear acrylic coating that provides effective static elimination for safe handling of electronics in explosive atmospheric applications.
Fully compliant with BS EN 61340-5-1:2007 and ATEX. Contains carbon nanotubes and graphene derivative.
Applications include lighting, windows, clear covers and lids, displays etc. Supplied as an aerosol for ease of application.
|Surface Resistivity at 50 micron (ASTM D257)
|Recommended Dry Film Thickness
|Touch 20 Minutes
Full 12 Hours
|Static Decay (IEC TC15)
|< 2 Seconds
Method of use:
All contaminants must be removed from the surface. Mark areas that do not require coating. A suitable primer may be necessary on certain substrates such as Polyethylene and Polypropylene. Please contact us for a suitable primer.
One or two passes are normally required to give optimum thickness and surface resistivity values depending on the degree of transparency required.
Supplied as a 365 ml aerosol and available as 1 liter can.
Highly flammable – Keep away from all sources of ignition including smoking, heat, sparks and open flames. Container should be tightly closed when not in use.
Use under well ventilated conditions. Personal respiratory protection should be worn during spraying. Such devices must be used in accordance with the manufacturers instructions.
Please avoid contact with skin, wear protective gloves and clothing. Wash thoroughly with soap and water after use. If accidentally swallowed, seek medical advice.
We do not provide free samples for this Product.
Get a Quotation
Fill in the form below