JHSC Home / Products / Holland Shielding Home / Aluminum Tape
Aluminium tape especially for EMI/RFI shielding/screening in aluminium housings and frames to prevent galvanic corrosion.
Aluminium tape was developed especially for EMI/RFI shielding/screening in Aluminium housings and frames to prevent galvanic corrosion.
We not only produce our Aluminium tape on rolls, but also die-cut according to the customer’s drawing on strips or in pieces (as stickers), both with or without self-adhesive.
3203 Aluminium tape, technical drawing
| Part number (with conductive adhesive) | 3203 |
|---|---|
| Part number (with standard adhesive) | 3303 |
| Construction |  |
| Foil material | Aluminium |
| Surface | Shiny |
| Foil thickness | 0.040 mm |
| Total thickness | 0.065 mm |
| Adhesive | Synthetic conductive resin |
| Adhesive performance | 4.5 N/cm |
| Tensile strength | 25 N/cm |
| Temperature resistance | 155 °C |
| El. resistance through adhesive | 0.003 Ohm |
| Standard roll widths (mm)* | 10, 25, 50, 100 |
| Roll lengths* | 16.5 m |
| These values are measured under laboratory conditions. In other situations, results may differ. Please read our Guarantee. | |
Aluminium tape for EMI/RFI shielding of Aluminium housings and frames
Thanks to our automated CNC cutting system we can cut Aluminium tape in large quantities and according to the customer’s CAD drawing
Aluminium tape can be cut to any width
Get a quotation
Fill in the form below
© Copyright 2022 Japan Homeland security Corporation. All Rights Reserved.
