For EMI shielding of panels and screwed applications like displays, windows, and honeycomb
The 8100 series Frame Gaskets are ready-made gaskets according to customer specifications. They have reinforced corner pieces to guarantee optimum shielding performance and easy mounting characteristics.
The base material is Amucor-shield 6800 series, Standard shield 7000 series or Ultra soft shield 7400 series.
The gasket can be produced with or without self-adhesive. When the gasket has little contact surface we recommend providing the gasket with an electrically conductive self-adhesive. The frame can be made with, without or with conductive adhesive and there is a amucor (8100) or conductive version (8101).
Shielding performance:
The product’s shielding performance depends on the chosen outer material (i.e. the conductive material). The 8100 series Frame gasket can be made with Amucor (Aluminum alloy) or conductive textile (very effective if combined with stainless steel, copper and chrome-plated constructions).
| Amucor shield |
| Conductive fabric |
Please note : These values are measured under laboratory conditions. Results may vary in other situations. Please read our Guarantee.
Benefits:
Core materials:
Disc or washer-type compression stops can be included to prevent over compression. Please see below.
8100 series Frame gasket; example of larger dimensions (1.0 x 0.6 m).
8101 Frame gasket; Amucor version with neoprene core. Holes according to customer’s drawing and conductive self-adhesive
8100 Frame gasket example. Version with conductive textile and low closure force polyurethane foam.
8100 Frame gasket; conductive textile version with self-adhesive on the back
1. Frame gasket used in a flat lid on a curved housing construction
2. Frame gasket used in a curved lid on a curved housing construction
3. Frame gasket used in a groove
If you send us a drawing, please include the dimensions shown above.
© Copyright 2022 Japan Homeland security Corporation. All Rights Reserved.
