L-Shaped Gasket with Waterseal

JHSC Home / Products / Holland Shielding Home / L-Shaped Gasket with Waterseal

L-Shaped Gasket with Water seal

L-Shape Gasket with Water seal 7500

For thin doors and lids, this L-shaped gasket is used to achieve two goals – a water seal and an EMI seal.

This L-shaped gasket as an efficient combination seal for doors and lids. The gasket is used to achieve two goals as: a water seal and an EMI seal.

The L-shaped gasket is made from a solid piece of neoprene foam. One side has been laminated with conductive textile (the conductive side) and the other side is uncovered neoprene which provides a water seal.

The flange of the door will compress the water-seal side of the gasket with very little force to assure a watertight seal.

The electrically conductive part on the other side of the gasket establishes an electrical connection between the lid and housing

Benefits

Bends easily around sharp corners without interrupting the water seal
Excellent water sealing up to IP65 (depending on construction)
Easily mounted with a self-adhesive strip
Easy to use for small doors and lids
Low closure force to prevent bending of doors and lids
Roll lengths of 1 to 1.000 meters, depending on width and height of the gasket
Tools required: a pair of scissors

Options (on request)

Custom made in the dimensions you need
Available in flame-retardant version
Available with conductive self-adhesive
Available with chemical-resistant rubbers like EPDM
Silicone sponge for high temperatures up to 220 °C
Various conductive foils and fabrics
Cut into accurate lengths
In the shape of a ready-made frame

7500 series – L-shape gaskets

7500 series L-shaped gaskets (Electric / Far Field)

Please note: These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.

Techncial drawing

The picture shows a closed lid with the gasket mounted on the inside of the lid.

The gasket can be supplied in virtually any size. Please specify the size you are looking for by email, or use the contact form on the bottom of this webpage.

The picture above shows the gasket mounted on the inside of the lid. This L-shaped EMI/RFI-shielding gasket can be mounted with a self-adhesive that can optionally be conductive. When the lid is closed, the electrical contact is shielded from water and dust.

Standard Dimensions

Part number	A	Y
7500-2-4-X	2	4
7500-2-6-X	2	6
7500-2-8-X	2	8
7500-3-6-X	3	6
7500-3-8-X	3	8
7500-3-10-X	3	10
7500-4-8-X	4	8
7500-4-10-X	4	10
7500-4-12-X	4	12
7500-5-8-X	5	8
7500-5-10-X	5	10
7500-5-12-X	5	12
7500-6-8-X	6	8
7500-6-10-X	6	10
7500-6-12-X	6	12
7500-7-10-X	7	10
7500-7-12-X	7	12
7500-7-14-X	7	14
7500-8-14-X	8	14
7500-8-16-X	8	16
7500-8-18-X	8	18
X = conductive cover Other sizes on request

Technical Datasheet

7500- L-Shape Gaskets TDS

Get a Quotation

Fill in the form below

Name

Company

Phone Number

Part number

A (mm)

Y (mm)

Cover

Optionally add a drawing of the product here.

Amount

Unit

Email Us

Call Us

L-Shaped Gasket with Waterseal