Shieldokit creates an electrically and thermally conductive connection between components (electrically conductive adhesive). One of the applications is EMI shielding. The conductive glue cures at room temperature and has excellent filling properties. The viscosity is comparable to peanut butter so it can be used to fill uneven surfaces.
The product consists of a two-component epoxy-based glue containing 80% silver. It is a paste and can be applied to metals (copper, aluminum, stainless steel, brass, etc.), ceramics and most plastics.
Structure:
Shieldokit is a solvent-free, silver pigmented adhesive, based on a two-component epoxy resin.
Special characteristics:
The kit creates a strong connection with excellent conductivity. It is designed to connect temperature-sensitive components.
Application:
Shieldokit is designed to connect parts at temperatures between 20 °C and 80 °C. The adhesive can be applied with a dispenser or by screen printing. Tools have to be cleaned immediately after use.
Uses:
Packaging:
Shieldokit is supplied in small containers of 30 grams of glue (component A) and a syringe filled with hardener (component B). Optional bigger packages are available on request. For more details see our technical datasheet.
Storage:
Component A
At temperatures below 25 °C the product can be stored up to 2 years in its original sealed packaging.
Component B
Hardener can be stored between 5 °C and 40 °C.
Specifications / Technical data:
| Silver content | % by weight | 80% |
| Viscosity (D = 25s-1) | mPas | 20.000 – 30.000 |
| Mixing ratio Shieldokit conductive glue (component A) and hardener (component B) | 50 : 1 | |
| Drying recommendations (depends on parameters like layer thickness, application and drying process) | h/°C min./°C | 24/rt 180/80 |
| Surface resistance of the layer at 80 °C (depends on parameters like layer thickness, application and drying process) | mΩ/cm² | < 100 |
| Temperature stability of separate components | °C | – 40 to + 150 |
| Hardener | Shieldokit hardener (component B) |
Curing:
| Temperature | Time |
| 21 °C | 30 hours |
| 50 °C | 3 hours |
| 80 °C | 2 hours |
| 100 °C | 1 hour |
| 200 °C | 10 min |
Shieldokit 3980, packaging
3980 – Electrically conductive glue, mixing of the two components (Conductive glue component A & hardener component B).
Electrically and thermally conductive connection between heat-sensitive components that cannot be soldered
Electrically conductive connection between a conductive window and a plastic enclosure, ensuring full EMI-shielding integrity
The glue can be used for creating a conductive edge for convenient mounting
Restoration of contact points on ribbon cables
Get a Quotation
Fill in the form below
© Copyright 2022 Japan Homeland security Corporation. All Rights Reserved.
