Mu-Ferro Foil & Tape

JHSC Home / Products / Holland Shielding Home / Mu-Ferro Foil & Tape

Mu-ferro foil & tape

 Mu-Ferro Foil & Tape 3208 Series

Mu-ferro foil & tape have been developed for low-frequency (LF) magnetic field shielding

Mu-ferro foil/tape is a thin foil; its thickness is only 0.023 mm. It combines excellent soft magnetic properties with unusual mechanical hardness and flexibility. This means that tight bends, shapes and folds can be made with very minimum effort. The fine strip thickness and comparatively low electrical conductivity permits effective shielding even of higher-frequency fields.

Applications:

The primary applications of Mu-ferro foil/tape are flexible shielded cables with small diameters and rapid, flexible solutions to problems at low field strengths.

Other applications:

  • Magnet heads
  • Magnetic field sensors
  • Chokes
  • Transformers
  • Electronic article-surveillance tags

Characteristics:
Mu-ferro foil works well for shielding low-frequency magnetic fields. Due to the low electrical resistance it shields both low-frequency electric fields (LF) and high-frequency fields (HF). Comparable with Mu-Metal specifications.

Advantages:
  • Very high permeability
  • Low losses
Properties:
  • Easy to bend
  • Easy to fold
  • Can be cut with scissors
  • Good corrosion resistance in a normal environment
  • Bending, folding, cutting, etc. does not cause major loss of attenuation

Grounding:
Due to the highly conductive surface this material can be grounded easily to shield low-frequency (LF) electric fields. For professional grounding please contact us.

3208 Mu-ferro foil and tape for low-frequency magnetic shielding
We can slice all our EMI/RFI-shielding tapes to any specific width
Mu-ferro foil (3284)
Technical drawing
Mu-ferro tape with conductive adhesive (3208)
Technical drawing
Mu-ferro tape with standard adhesive (3305)
Technical drawing
Mu-ferro foil with 0.15 mm thick, white insulation layer (3408)
Technical drawing
Mu-ferro foil with 0.22 mm thick, black insulation layer (3468)
Technical drawing

Technical data

WidthAny width up to 50 mm
LengthBy the meter; rolls of up to 100 m
Attenuation LF magnetic field14 dB = 80 % (for more shielding, use multiple layers); Attenuation HF: 100 dB at 1 GHz
Permeabilityμ 4 = 10000; μ max. = 25000
Saturation induction Bs0.58 T
Density7.7 g/cm3
Curie temperature °C200
Crystallisation temperature Tx °C530
Specific electrical resistance1.4 µΩm
These values are measured under laboratory conditions.
In other situations results may differ; please read our Guarantee.

Standard part numbers

Specification32843208330534083468
StructureMu-ferro foil structure Mu-ferro foil conductive adhesive structure Mu-ferro foil conductive adhesive structureMu-ferro foil black insulation layer structureMu-ferro foil black insulation layer structure
Product descriptionMu-ferro foilMu-ferro tape with conductive adhesiveMu-ferro tape with standard adhesiveMu-ferro foil with 0.15 mm thick, white insulation layerMu-ferro foil with 0.22 mm thick, black insulation layer
Foil materialMu-ferroMu-ferroMu-ferroMu-ferroMu-ferro
SurfaceSilver colourSilver colourSilver colourSilver colourSilver colour
Foil thickness0.023 mm0.023 mm0.023 mm0.023 mm0.023 mm
Total thickness0.023 mm0.048 mm0.048 mm0.175 mm0.243 mm
AdhesiveNo adhesiveSynthetic conductive resinSynthetic conductive resinNo adhesiveNo adhesive
Adhesive performance4.5 N/cm4.5 N/cm
Tensile strength
Temperature resistance
El. resistance through adhesive0.003 ohms0.003 ohms
Standard roll widths (mm)*max. 50 mmmax. 50 mmmax. 50 mmmax. 50 mmmax. 50 mm
Roll lengths*max. 100 mmax. 100 mmax. 100 mmax. 100 mmax. 100 m
These values are measured under laboratory conditions and results may differ in other situations. Please read our Guarantee.

Other roll widths/lengths on request

Get a Quotation

Fill in the form below