EMI Cable Shielding with Metal Carrier and Copper Tape

JHSC Home / Products / Holland Shielding Home / EMI Cable Shielding with Metal Carrier and Copper Tape

EMI Cable Shielding with Metal Carrier and Copper Tape

EMI cable shielding with metal carrier and copper tape AC4400DS

Stainless steel spiral hose used as steel carrier is o general purpose high quality connecting hose. Made of AISI 304L stainless steel material.

After the tin-plated copper wire mesh wrapped on the steel carrier, an intermediate layer is applied with conductive copper tape material in one layer.

The product is completed by making a shielding braid with tin-plated copper wires as the top layer on the applied copper tape layer. It is produced in 1 o different diameters from 11,0 mm to 62,9 mm.

EMI cable shielding with metaal carrier and copper tape

EMI cable shielding with metaal carrier and copper tape Cu/Sn*
Part numberSteel carrier inner diameter (mm)Steel carrier outer diameter (mm) Knitted outer diameter (mm)Tolerance (mm)Copper wire diameter (mm)Minimum bending diameter static rmin (mm)**
AC4411DS6,29,611,0±0,20,12733
AC4414DS8,212,214,0±0,2 0,127 44
AC4416DS10,214,215,9±0,3 0,127 50
AC4418DS12,216,318,1±0,3 0,127 57
AC4423DS16,221,623,1±0,30,127 63
AC4429DS20,226,928,8±0,30,127 90
AC4434DS25,3 32,1 34,3±0,40,200109
AC4444DS32,241,143,6±0,40,200135
AC4453DS40,149,752,6±0,40,200168
AC4463DS50,260,262,9±0,50,200208
* With tin-plated copper wire
** The bending diameter may vary ±15% depending on the amount of wiring harness applied.

Get a quotation

Fill in the form below