ITO Printing

JHSC Home / Products / Holland Shielding Home / ITO Printing

ITO Printing

We can print/coat ITO on any (transparent) surface

We offer a special coating Equipment that we can print on any desired material.

Depending on the thickness of the coating used, excellent electric and electromagnetic shielding of 40-70 dB at 10 KHz to 300 MHz and 25-40 dB from 300 MHz to 22 GHz can be achieved.

The specialty of one side transparent conductive coated materials is that optical transmittance is very good and transparency is very high.

The coating is widely used for applications of EL panels, LCD EMI shielding, touchscreens, flexible solar cells etc.

We can print/coat ITO on any (transparent) surface

ITO printing specifications

Wet Film Thickness	Dry film Thickness	Amount ITO	Amount ITO “structured electrode”	Sheet resistance	Transmittance	Haze
[μm]	[μm]	[g/sqm]	[g/sqm]	[Ohm/sq.]	[%]	[%]
4	<1	1.3	0.15	≥ 100000	93.0	0.7
6	1	1.9	0.2	≥ 10000	92.0	0.8
12	1- 2	3.8	0.4	≥ 10000	91.1	1.0
24	2- 3	7.7	0.8	≥ 1000	87.2	1.1
36	3- 4	11.6	1.2	≥ 800	87.4	1.3
50	4- 5	16.0	1.6	≥ 300	85.0	1.6
80	7- 8	25.8	2.6	≥ 300	70.2	2.3

Amounts of ITO are dependent on the binder matrix and can still be improved. Transmittance and Haze have been measured on Glass sheets + ITO lacquer (Glass sheet: 3 mm thickness, Transmittance = 92 %, Haze = 0.2 %). Structured electrode assumes 10 % surface covered with ITO.