Our transparent coating is a polyurethane graphene hybrid paint. It is suitable for applications where a highly conductive surface is required on a flexible surface. For example on:
Technical data
| Surface Resistivity | <107 ohms/Sq | |
| Colour | Transparent | |
| Flash Point | 4 °C | |
| Overcoating | Possible at any stage of dry | |
| Film Thickness | Wet | 50 micron |
| Dry | 10 – 15 micron | |
| Elongation | Approximately 500% | |
| Finish | Low gloss | |
| Coverage | Approx. 10 sq.m/litre. (dependent on substrate) | |
| Storage | 12 months in original sealed containers | |
| Maximum VOC Content | 0.8 kgs/ltr |
Applications
Typical applications include the removal of static electricity from electronic components in sensitive areas, such as touch screen monitors and flexible control panels in hospitals, as well as ATEX processing environments such as oil rigs etc. The 3822 transparent coating is generally applied directly to a clean and grease free the substrate.
Thinners may attack some plastics so try on before full application. The paint is thinned with approximately 15-30 % thinner for spraying or 10% thinner for brushing.
The 3822 is an air drying coating that is dries to touch in approximately 5 minutes at 20 °C, hard dry in 20 minutes, with full properties in around 1 hour.
Notice: There are no free samples available for this product.
Get a Quotation
Fill in the form below
© Copyright 2022 Japan Homeland security Corporation. All Rights Reserved.
