Nonflammable High Power Handling Absorber

Nonflammable High Power handling Absorbers

 Nonflammable high power handling absorbers 3680

Nonflammable high power handling EM absorbers for anechoic chambers

Our Nonflammable high power handling absorber, is a non-woven fabrics based hollow broadband microwave absorbers with fire retardant and microwave absorption impregnated.

It is mainly used in microwave anechoic chambers and can be used to shield the test equipment inside the chamber; under vertical incidence and oblique incidence conditions. It has better broadband performance; meanwhile, it has a very good scattering attenuation and isolation performance, and can be applied for all parts of the anechoic chambers.

It is a hollow broadband microwave absorber which is made of a heat resistance non-woven fabric dipped with flame retardants and microwave absorbing agents. It is mainly used in microwave anechoic chamber and covers the test equipment. Under the condition of normal incidence and oblique incidence, it has better broadband performance as well as scattering and isolation attenuation performance; it can be used in any part of the chamber.

Nonflammable high power handling absorbers

3680-300 (300 mm height Nonflammable high power handling absorbers)

Characteristics:
  • Good flame retardant characteristics and won’t burn when it comes into contact with fire. It has oxygen index ≥ 60% and flame retardant B1 level.
  • Excellent high power handling capacity, it can withstand power irradiation (continuous wave) ≥ 6kW/m2
  • It uses keel mounting method without any adhesive.
  • The absorbing performance of such absorbers is equal to or better than the PU foam absorber with same height.
  • It adopts inorganic flame retardants and microwave absorption, not volatile, no smell and non-toxic; it is stable in long-term use.
  • Working conditions:
    • Long-time working temperature: -50 °C ~ 120 °C
      Short-time working temperature: -100 °C ~ 150 °C
    • Relative humidity: 55% ± 15%
Schematic diagram of high power handling nonflammable pyramid absorber

Nonflammable high power handling absorbers technical drawing schematic diagram

Schematic diagram of nonflammable pyramid absorber

Nonflammable high power handling absorbers technical drawing schematic diagram

Schematic diagram of nonflammable pyramid absorber

Product specification and part numbers:
Part numberBase size (mm*mm)Pyramid quantity per unitUnit size A*C*B (mm*mm*mm)Standard weight
(kg/m2)
3680-190500×50081190×65×5010
3680-30064300×60×5013
3680-50064500×60×7619
3680-69036690×80×9020
3680-1000161000×123×16026
3680-120091200×163×18028
3680-150091500×163×20529
3680-160091600×163×22040
 
Reflection loss / Shielding performance
Part numberReflection loss under vertical incidence (-dB @ GHz)Power handling
capacity kW/m2
0.030.080.30.5136101840100
3680-190    273540455050453
3680-300   25354050505050453
3680-500  2030404550505050454
3680-690 82535405050505050455
3680-1000 113040455050505050455
3680-12005133540455050505050456
3680-150011143540505050505050456
3680-160014163545505050505050456
These values are measured under laboratory conditions. Results may very in other situation. Please read our Guarantee.

Please note:

  • The 500 MHz data was obtained by low-frequency coaxial test method (GJB5239-2004); while 1 GHz data was obtained by far-field RCS test method (GJB2038A-2011)
  • The performance data listed in the above table is the guaranteed data, and the measured data would be equal to or better than the guaranteed data.
  • 3680-1600 can also be used in EMC chambers such as 10 meters and 3 meters.
  • The bold part number is a stock item and can be delivered immediately
  • Certification: CE RoHS

Get a Quotation

Fill in the form below.