Power line filters with line legs
The 8030 series power line filters with line legs at load side is capable of providing a radiated transmission loss of 100 dB at 14 kHz up to 40 GHz. The leakage current is in milliampere level and the voltage drop is less than 1 V.
Applications
- Shielded rooms
- Shielded chambers
- Anechoic chambers
- Military applications
- Medical applications
Advantages
- Applicable in very low frequency (VLF) applications
- Can be delivered EMP-proof
- Suitable for use under extreme conditions (military applications)
- Wear resistant
- Insensitive to corrosion
8030 series Power line filter with line legs at load side with open lid
8030 series Power line filter with line legs at load side with closed lid
Technical data
| Rated voltage VR for two-line filters | 250 VAC / 500 VDC | line-line or line-case |
| Rated voltage VR for four-line filters | up to 440 VAC up to 220 VAC | line-line line-case |
| Rated Frequency fR | DC -60 Hz | |
| Rated Current IR | See characteristics | referred to + 40 °C ambient temperature |
| Number of lines | 2/4 | |
| Test voltage | 1200 VDC / 2 s | line-line or line-case |
| Voltage drop/phase ΔV | < 1 % | of VR at 50 Hz and IR |
| Leakage current I Leakage | See characteristics | at 380 V / 220 V and 50 Hz |
| Reactive Current I Reactive | See characteristics | at 380 V / 220 V and 50 Hz |
| Discharge Time to Below 34 V | 30 S | |
| Climatic category | 25/070/21 |
Product Range
| Part number | IR (A) | I Leakage (A)* | Terminal connection | Shielding effectivenes (dB) | |
|---|---|---|---|---|---|
| Load | Line | ||||
| 8030-2-6 | 2×6 | 0.02 | Line legs | Line legs | 100 dB, 14 kHz – 40 GHz |
| 8030-2-16 | 2×16 | 0.02 | M6 Screw | Line legs | |
| 8030-2-32 | 2×32 | 0.02 | M6 Screw | Line legs | |
| 8030-2-63 | 2×63 | 0.15 | M6 Screw | Line legs | |
| 8030-2-100 | 2×100 | 0.15 | M12 Screw | Line legs | |
| 8030-2-200 | 2×200 | 0.15 | M12 Screw | Line legs | |
| 8030-2-250 | 2×250 | 0.15 | M12 Screw | Line legs | |
| 8030-4-16 | 4×16 | 0.005 | M6 Screw | Line legs | |
| 8030-4-32 | 4×32 | 0.005 | M6 Screw | Line legs | |
| 8030-4-63 | 4×63 | 0.005 | M6 Screw | Line legs | |
| 8030-4-100 | 4×100 | 0.05 | M12 Screw | Line legs | |
| 8030-4-200 | 4×200 | 0.05 | M12 Screw | Line legs | |
| 8030-4-250 | 4×250 | 0.05 | M12 Screw | Line legs | |
| * If voltage between neutral and earth is 0V | |||||
Dimensional Diagrams
Diagram 1
Diagram 2
Diagram 3
Available Dimensions
| Part number | A | B | C | D | E | F | G | installation instructions | Outline drawing |
|---|---|---|---|---|---|---|---|---|---|
| 8030-2-6 | M16 conduit screw | 1 | |||||||
| 8030-2-16 | 620 | 120 | 80 | 535 | 60 | 50 | 45 | M33 conduit screw | 2 |
| 8030-2-32 | 620 | 120 | 80 | 535 | 60 | 50 | 45 | M33 conduit screw | 2 |
| 8030-2-63 | 800 | 160 | 120 | 715 | 80 | 50 | 45 | M33 conduit screw | 2 |
| 8030-2-100 | 880 | 200 | 150 | 790 | 120 | 50 | 33 | M60 conduit screw | 3 |
| 8030-2-200 | 880 | 200 | 150 | 790 | 120 | 50 | 33 | M60 conduit screw | 3 |
| 8030-2-250 | 880 | 200 | 150 | 790 | 120 | 50 | 33 | M60 conduit screw | 3 |
| 8030-4-16 | 720 | 240 | 80 | 635 | 140 | 50 | 45 | M33 conduit screw | 4 |
| 8030-4-32 | 720 | 240 | 80 | 635 | 140 | 50 | 45 | M33 conduit screw | 4 |
| 8030-4-63 | 900 | 320 | 120 | 815 | 160 | 50 | 45 | M33 conduit screw | 4 |
| 8030-4-100 | 900 | 320 | 150 | 790 | 180 | 50 | 33 | M60 conduit screw | 5 |
| 8030-4-200 | 900 | 320 | 150 | 790 | 180 | 50 | 33 | M60 conduit screw | 5 |
| 8030-4-250 | 900 | 320 | 150 | 790 | 180 | 50 | 33 | M60 conduit screw | 5 |