Mu-ferro-SD shielding foil
The Mu-ferro shielding foil is a magnetic shielding sheet and made of a high permability material laminated on a PET film. The sheets are easy to handle and because of the thinness of 0.12 mm the material is very flexible.
The mu-ferro shielding foil is lightweight and has a superior magnetic shielding effect. The best shielding frequency can be made when the frequency gets below several 100 kHz.
When one layer of Mu-ferro foil is used it can shield 100 μT. When multiple layers of the material are used it can shield a strong magnetic field.
Having small deterioration in shielding effect by bending, cutting and punching, Mu-ferro foil can be applied on curved surface and cut or punched in various shapes.
The foil is also available in a long sheet and is suitable for large-scale magnetic shielding for example a shielded room.
Applications
- For suppression of magnetic noise generated from inductors in electronic devices, such as personal computer, mobile phone, DVC, DSC, etc.
- For magnetic shielding of buildings or houses close to power lines or power distribution installation.
- For magnetic shielding of equipments that are easily affected by geomagnetic field or fluctuating magnetic field.
Specifications
| Type | Long Sheet | Sheet | |
| Part number | |||
| Dimensions | Length | 100 m | 610 mm |
| Width | 470 mm | 460 mm | |
| Thickness | 0.12 mm | ||
| Magnetic flux density, B800 (DC H=800A/m) | 1.23 T | ||
| Maximum permeability, μmax (DC) | 70.000 | ||
| Operating temperature range | -40°C +80°C | ||
Double-sided adhesive tape is available for 610 mm × 460 mm sheet.
Shielding effect
